Prices Start to “Normalize” for Handgun Ammo

We know that factory ammo for popular handgun calibers is still hard to find. This has lead to ammunition hording by handgun owners and painful price hikes from some ammo vendors. We saw one dealer charging nearly $40.00 for a 50-rd box of .380 ACP, more than double what the same ammo sold for 18 months ago. However, if you search around you’ll find that prices are starting to drop and we’re seeing supplies that haven’t been available in months.

Decent Pricing on 9mm and 40sw Can Be Found
Thankfully, some major dealers are holding the line on ammo prices and not taking advantage of the current supply shortages. Ammoman.com has Winchester 9mm ammo with 147gr BEB (Brass Enclosed Base) bullets at a good price: $159 for 500 rounds. This is new, US-made ammo ideal for use at indoor ranges as the enclosed base bullet design reduces lead pollution. With BEB bullets, guns run cleaner too as there is no vaporized lead left in the barrel.

For 40sw shooters, both Grafs.com and MidwayUSA.com have the PRVI Partisan 40sw 180gr TMJ ammo in stock right now. Graf’s sells the 40sw Prvi ammo for $20.99 per 50rd box, while MidwayUSA has the same product (40sw, 180gr TMJ) for $21.49 per 50rd box. Those are decent prices for factory ammo these days.

Hornady Announces NEW Superformance Ammunition — Claims 100-200 FPS More Velocity

Hornady Manufacturing has just announced its new line of “Superformance” hunting ammunition. Hornady claims that, “across the board” the new Superformance ammo will deliver “100 to 200 fps higher velocities than any other standard ammunition currently available.” Hornady also claims its Superformance ammo delivers increased velocities “WITHOUT increases in felt recoil, muzzle blast, temperature sensitivity, fouling or loss of accuracy.” Hornady President Steve Hornady says this is “a whole new standard in ammunition performance… We are going to be able to raise the velocity of almost any [hunting] load you’ve ever used… by 100-200 fps.” Surprisingly, the marketing materials even claim that Superformance ammo delivers higher velocities with “no increases in barrel wear” — something that runs contrary to common sense.

Rather amazing claims are being made for this new Hornady ammo. Are such claims to be believed? Well, when AccurateShooter.com tested Alliant Reloder 17 powder last year we confirmed that it could deliver 100-200 fps more velocity than most popular powders, in some cartridges. Presumably, Hornady is employing propellants with technologies similar to Reloder 17. Hornady’s marketing materials state that it is using “ultra progressive” “21st Century” propellants for the new Superformance ammo. Hornady has also brought out a line of GMX® mono-metal bullets that feature two deep cannelures for reduced bearing surface. It is well-established that this kind of bullet design can yield higher velocities, particularly in the big-bore calibers with heavy bullets.

So… the velocity claims may be bonafied, though we would expect the velocity gains will vary among the cartridges. Some chamberings will benefit from the new propellants more than others. And only half the Superformance ammo line-up features GMX bullets, the other half being loaded with more conventional SST® bullets.

How about the claims regarding recoil? The claim that Superformance ammo can deliver 100-200 fps more velocity without any more recoil is questionable. Hornady can’t alter the laws of physics. If a bullet of given weight has a higher muzzle velocity, it MUST produce more recoil than the same bullet moving slower — provided that the propellant charge weight (and rifle weight) are held constant. The only way Hornady can achieve higher velocities without increased recoil is by either: 1) reducing bullet weight; or 2) reducing the powder charge (or gas-related recoil). Hornady could hold recoil constant if its new propellants achieve the higher velocities with a reduced powder charge compared to “conventional” loads.

Hornady has issued an 11-page technical report that provides support for many of its marketing claims. Authored by Hornady Senior Ballistician Dave Emary, the report features some interesting test results, summarized in graphs. Regarding the recoil question, Emary argues that “Recoil … has parts to it that are not commonly understood. The fundamental misunderstanding of recoil is that the recoil is over when the bullet leaves the barrel. In truth, the vast majority of recoil occurs after the projectile exits the barrel. By far the greatest percentage of recoil is produced by the force of the gases and propellant residue/ejecta leaving the barrel.” Emary cites test results showing that “approximately 85 – 90% of the recoil happens after the projectile has left the barrel”. If Emary is correct, then Hornady might be able to achieve higher bullet velocities without enhanced recoil, provided the gas-based force is reduced.

We strongly recommend you read Emary’s report. CLICK HERE to download Superformance Ammo Report.

Hornady plans to release a complete line-up of Superformance ammunition for twenty chamberings: 243 Win, 6mm Rem, 257 Roberts, 25-06, 6.5 Creedmoor, 270 win, 7×57, 7mm-08, 280 Rem, 7mm Mag, 308 Win, 30 TC, 30-06, 300 RCM, 300 Win Mag, 338 RCM, 338 Win Mag, 375 H&H, 375 Ruger, and 458 Win Mag. CLICK HERE to review all the available calibers and bullet options for Superformance ammunition.

National Ammo Day is November 19th

Since 2001, November 19th has been decreed National Ammo Day. The backers of this event want each and every gun owner to purchase 100 rounds of ammunition this Thursday the 19th. The purpose of Ammo Day is to support the Second Amendment and to send a message to politicians.

There are an estimated 75 MILLION gun owners in the United States. If even 10% of them purchase ammo on Nov. 19th, this will demonstrate the size, and economic importance, of the gun-owning citizenry. If there’s one thing politicians cannot ignore, it’s tax revenues. The sales and excise taxes on guns and ammo help support many important public programs.

To learn more about National Ammo Day, visit www.Ammoday.com. Unfortunately, certain types of ammunition remain in short supply. Because of the surge in gun and ammo sales following last year’s Presidential election, most ammunition is quite a bit more costly than it was 12 months ago… if you can find it at all. One person, commenting on the Ammoday.com website, expressed his frustration with price hikes: “How about we don’t purchase any ammo on the 19th to send a message to the manufacturers that the price gouging better stop, or we’ll simply reload everything we shoot.” He has a point. However, in a market economy, supply and demand will always influence price levels.

FREE Shipping on Cabela’s Orders Over $150.00

If you plan to purchase ammo, reloading supplies, or outdoor gear, you can save money for the next four (4) days at Cabela’s. Now through November 10th, Cabela’s is offering FREE Shipping (to USA addresses) on orders of $150.00 or greater. To get this offer, click the link below and enter Promo Code 9HOLIDAY when filling out your order.

The Fine Print
This Free Shipping promo is not valid with any other offer, and cannot be used on prior purchases. The offer expires November 10, 2009 11:59 pm (EDT). NOTE: Additional shipping charges for large or heavy items may still apply.

New Graf’s Fall Flyer Released

The new Graf & Sons Fall 2009 Sale Flyer was just released. Log on to Grafs.com to download the 32-page Flyer and view the latest specials. Note: Grafs is now carrying Harrell’s Precision products (Flyer, p. 32), and RWS ammo is on sale (Flyer, p.6). Some of you guys may consider buying the 300 WSM or 375 H&H RWS ammo just to get the superb RWS Brass which is otherwise really hard to find.

CLICK HERE to download Graf’s Fall Flyer (PDF file)

California Legislature Approves Restriction on Ammo Sales — Bill Goes to Governor

AB 962, a new law restricting ammo sales, was passed by the California Legislature last Friday and sent to Governor Schwarzenegger’s desk. If not vetoed by the Governor, this bill could have a major negative effect on the shooting sports in the Golden State. AB 962, authored by Assemblyman De León (Dem. Los Angeles) was narrowly passed on a strict party line vote, on the last day of the Legislative session.

CLICK HERE for Final, Amended Text of AB 962

New Law Targets Pistol Ammo But Would Also Embrace Rifle Ammunition
AB 962 will restrict the sales of pistol ammunition. Unfortunately, the restriction will include common rifle ammo such as .22LR, .22 Magnum, and .223 Rem, because these cartridges are also used in pistols. If codified into law, commencing February 1, 2011, AB 962 would require handgun ammunition vendors to obtain a complete profile on ammo-purchasers including: residential address, phone number, Driver’s License number, birth date, and signature. In addition, ammo buyers must provide a thumbprint when purchasing pistol ammunition. A violation of these provisions would be a misdemeanor.

In addition, AB 962 could effectively prohibit online or mail-order sales of pistol ammunition to California residents. This is because, according to the Leg. Counsel’s Digest, “delivery or transfer of ownership of handgun ammunition may only occur in a face-to-face transaction, with the deliverer or transferor being provided bona fide evidence of identity of the purchaser or other transferee. A violation of these provisions would be a misdemeanor.”

The good news is that AB 962 was amended to eliminate the provision that would criminalize the “sale or transfer” or more than 50 rounds of pistol ammunition per month. Had that clause survived, it would have a chilling effect on all youth training programs because rangemasters, scout leaders, or shooting coaches could be jailed for handing out more than one box of rimfire ammo.

Nonetheless, AB 962 is a terrible piece of legislation. Unless Gov. Schwarzenegger vetoes AB 962, Californians will no longer be able to mail-order most rimfire ammo, all centerfire pistol ammo, and a potentially large selection of rifle ammunition. We can’t tell you exactly what kinds of rifle ammo would be embraced by AB 962, because the bill relies on the vague definitions of CA Penal Code Section 12323(a): “‘Handgun ammunition’ means ammunition principally for use in pistols, revolvers, and other firearms capable of being concealed upon the person… notwithstanding that the ammunition may also be used in some rifles.”

The California Rifle and Pistol Assn. (CRPA) is asking ALL California gun owners to contact Gov. Schwarzenegger immediately and urge him to VETO AB 962. You can send an email via the Governor’s home page at www.gov.ca.gov/interact. (Type your name and email address, select Gun Control under the “Choose Your Subject” menu, hit “Submit” — then write your message.) You can also call or send a fax to the Governor’s office (Phone (916) 445-2841; Fax (916) 558-3160). Gov. Schwarzenegger has until October 11, 2009 to sign, approve without signing, or veto bills passed by the Legislature.

Hornady Ammo Chosen for Springfield & Garand Matches

Hornady has been selected as the official ammunition supplier for the 2009 National Springfield and Garand Matches, to be held August 7 and 8, in Camp Perry, Ohio. Hornady’s 30-06 Garand Match Ammunition will be issued to all shooters competing in the Springfield Rifle Match, John C. Garand Match, and the Vintage Military Rifle Match.

Hornady 30-06 M1 Garand Match Ammunition delivers a 168gr A-Max bullet at 2710 fps MV. Hornady’s Garand ammo is purpose-built for the Garand platform, employing medium burn-rate propellants that protect the M1 rifle’s gas port system, meeting all SAAMI guidelines.

According to Hornady, some 30-06 military surplus ammunition and current 30-06 commercial ammunition is too powerful for the gas operating system of the M1 Garand. “Permanent damage can occur while shooting standard [modern] factory-loaded 30-06 ammunition in the M1 Garand,” said Dave Emary, Hornady Chief Ballistic Scientist. “Typical factory loads contain propellants that when fired, result in port pressures and gas volumes that are too high, causing violent stress to the rifle’s operating rod, bolt, and receiver.”

Rifle-Mounted Ammo Carriers — Low-Cost or Tacti-Cool

One of our writers is shooting in the SoCal Precision Rifle Competition (SCPRC) match this weekend. When assembling his gear for this tactical match we realized there was a problem. He needed to carry 10 rounds “at the ready”, but his rifle lacked detachable magazines. He didn’t want to depend on ammo stored in a backpack or carried in a belt caddy. To quickly access the ammo on his belt or in his pack he would have to get up out of firing position. Our challenge was to figure out the most efficient way to stow 10 rounds on the gun itself.

Elastic Ammo Sleeves
To secure the needed 10 rounds on the gun, we looked at a variety of options. First we tried some slide-on elastic sleeves. These were cheap ($4-$6), but the elastic sleeve tended to slide forward on the buttstock, and as it moved forward it could also rotate. Plus these elastic sleeves held only 9 rounds max. One too few. Shown in the photos are the $4.99 Cabela’s 8-round “Bullet Band” and the Allen 9-round ammo carrier ($3.49 on sale at MidwayUSA). Yes our writer could carry an extra round in his pocket, but we figured there was a better solution.

8-Round Eagle Ammo Carrier
Next we looked at the Eagle Industries Gunstock Ammo Carrier. With THREE velcro-secured straps, including one around the back, this holder was secure. It didn’t slide forward or rotate on the butt-stock. However it cost $28.00 locally, and it only held 8 rounds. Too much money for too little capacity….

Plastic Ammo Caddy Solution — 10 Rounds, Zero Dollars
We then came up with a very simple solution. Federal ammunition comes in sturdy, TEN-round plastic ammo caddies that protect the bullet tips. The caddies have plastic loops at either end so that you can carry the unit on a belt (or other strap). These cartridge-holders cost nothing — people toss them into the trash at ranges.

Using strapping tape — one strand through the loops on the backside, and another layer over the top — we had our “field expedient” 10-round ammo carrier for an all-up cost of $0.00. Zip. Nada. (Duct-tape works as well, but the strapping tape is a cleaner install. See photo right.)

Ugly? Yes — but hey, it works.

Another option with the plastic caddy is body-mounting. Using the belt loops, you can sew the cartridge-holder to an elastic (fabric) arm brace and just slip it on your forearm. That gives you a 10-round, easy-access ammo carrier for under $5.00.

Gunstock Ammunition Carrier (Plus Plastic Caddy in Pocket)
OK, even if it IS a cheap, functional solution, some of you guys will NEVER duct-tape a plastic cartridge holder to your $4500.00 tactical wondergun. It’s just not… how shall we say… “Tacti-Cool”. We know that some Tac shooters are acutely image-conscious. For them it would be a major fashion faux pas to duct-tape an ammo caddy to an Accuracy Int’l or GAP Crusader.

If you don’t mind dropping $40.00 or so, there is a solution that gives you a proper tactical set-up, PLUS 15 rounds on the rifle. This, ultimately, is what our writer chose. He purchased an Eagle Industries Stock Pack ($39.09). This features a padded, suede cheekpad, and secure elastic straps at the rear and bottom. Our writer now can mount five (5) rounds on the outside of the pack. In addition, he carries ten (10) more rounds on his Federal plastic cartridge holder, stowed in the Stock Pack’s zippered pocket.

Six Tips for Better Results at Club Matches

Every summer weekend, there are probably 400 or more club “fun matches” conducted around the country. One of the good things about these club shoots is that you don’t have to spend a fortune on equipment to have fun. But we’ve seen that many club shooters handicap themselves with a few common equipment oversights or lack of attention to detail while reloading. Here are SIX TIPS that can help you avoid these common mistakes, and build more accurate ammo for your club matches.

1. Align Front Rest and Rear Bags. We see many shooters whose rear bag is angled left or right relative to the bore axis. This can happen when you rush your set-up. But even if you set the gun up carefully, the rear bag can twist due to recoil or the way your arm contacts the bag. After every shot, make sure your rear bag is aligned properly (this is especially important for bag squeezers who may actually pull the bag out of alignment as they squeeze).

Forum member ArtB adds: “To align my front rest and rear bag with the target, I use an old golf club shaft. I run it from my front rest stop through a line that crosses over my speed screw and into the slot between the two ears. I stand behind that set-up and make sure I see a straight line pointing at the target. I also have a piece of tape that I’ve placed on the golf shaft that indicates how far the back end of the rear bag should be placed from the front rest stop. Don’t have an old golf shaft? Go to Home Depot and buy an inexpensive piece of wood dowel.”

2. Avoid Contact Interference. We see three common kinds of contact or mechanical interference that can really hurt accuracy. First, if your stock has front and/or rear sling swivels make sure these do NOT contact the front or rear bags at any point of the gun’s travel. When a sling swivel digs into the front bag that can cause a shot to pop high or low. To avoid this, reposition the rifle so the swivels don’t contact the bags or simply remove the swivels before your match. Second, watch out for the rear of the stock grip area. Make sure this is not resting on the bag as you fire and that it can’t come back to contact the bag during recoil. That lip or edge at the bottom of the grip can cause problems when it contacts the rear bag. Third, watch out for the stud or arm on the front rest that limits forward stock travel. With some rests this is high enough that it can actually contact the barrel. We encountered one shooter recently who was complaining about “vertical flyers” during his match. It turns out his barrel was actually hitting the front stop! With most front rests you can either lower the stop or twist the arm to the left or right so it won’t contact the barrel.

3. Weigh Your Charges — Every One. This may sound obvious, but many folks still rely on a powder measure. Yes we know that most short-range BR shooters throw their charges without weighing, but if you’re going to pre-load for a club match there is no reason NOT to weigh your charges. You may be surprised at how inconsistent your powder measure actually is. One of our testers was recently throwing H4198 charges from a Harrell’s measure for his 30BR. Each charge was then weighed twice with a Denver Instrument lab scale. Our tester found that thrown charges varied by up to 0.7 grains! And that’s with a premium measure.

4. Measure Your Loaded Ammo — After Bullet Seating. Even if you’ve checked your brass and bullets prior to assembling your ammo, we recommend that you weigh your loaded rounds and measure them from base of case to bullet ogive using a comparator. If you find a round that is “way off” in weight or more than .005″ off your intended base to ogive length, set it aside and use that round for a fouler. (Note: if the weight is off by more than 6 or 7 grains you may want to disassemble the round and check your powder charge.) With premium, pre-sorted bullets, we’ve found that we can keep 95% of loaded rounds within a range of .002″, measuring from base (of case) to ogive. Now, with some lots of bullets, you just can’t keep things within .002″, but you should still measure each loaded match round to ensure you don’t have some cases that are way too short or way too long.

5. Check Your Fasteners. Before a match you need to double-check your scope rings or iron sight mounts to ensure everything is tight. Likewise, you should check the tension on the screws/bolts that hold the action in place. Even with a low-recoiling rimfire rifle, action screws or scope rings can come loose during normal shooting.

6. Make a Checklist and Pack the Night Before. Ever drive 50 miles to a match then discover you have the wrong ammo or that you forgot your bolt? Well, mistakes like that happen to the best of us. You can avoid these oversights (and reduce stress at matches) by making a checklist of all the stuff you need. Organize your firearms, range kit, ammo box, and shooting accessories the night before the match. And, like a good Boy Scout, “be prepared”. Bring a jacket and hat if it might be cold. If you have windflags, bring them (even if you’re not sure the rules allow them). Bring spare batteries, and it’s wise to bring a spare rifle and ammo for it. If you have just one gun, a simple mechanical breakdown (such as a broken firing pin) can ruin your whole weekend.

Brazilian Ammo-Maker Acquires Sellier & Bellot

You may have already heard this news, but we wanted to repeat it for our readers. Czech ammo-maker Sellier & Bellot was acquired in April by Companhia Brasileira de Cartuchos (CBC) a Brazilian enterprise. CBC produces civilian and military ammunition in calibers up to 30mm, and CBC sells a small line of sporting arms. CBC also owns U.S.-based MagTech Ammunition and Metallwerk Elisenhutte GmbH (MEN) of Germany.

Founded in 1825, Sellier & Bellot has been a world leader in ammo production for over 180 years. It produces a very wide range of cartridge types, including pistol ammo, hunting ammo, and a large selection of both modern and “classic” military cartridges. CBC states that Sellier & Bellot will continue under current management, delivering Sellier & Bellot branded ammo through its current sales channels.

TECH TIP: How to Select the Right Bushing for your Neck Die

One of the most commonly-asked questions on our Shooters Forum is “what diameter bushing should I use with my neck-sizing die?” While we recommend that users obtain at least two bushings, you still have to know where to start. For hunting ammo and gas guns, we still recommend choosing a bushing that is 2 or 3 thousandths smaller than the neck diameter of a loaded round. However, in a bolt-action benchrest gun, you may well get superior accuracy with less neck tension. Larry Isenhour recently set a spectacular 50-5X 600-yard IBS record using very light tension — Larry employed a .268″ bushing for a .2695″ loaded round. At the NRA Annual meeting we discussed neck bushings during our visit to the Redding Reloading booth. It turns out that Redding has changed its recommendations for benchrest neck sizing, and now recommends that you chose a bushing that yields less tension. In the video below Patrick Ryan of Redding explains how to measure your cartridge brass and select the proper bushing diameter. Patrick also reviews some new Redding products for 2009.

Federal Introduces Affordable Ammo for M1 Garand and M1A

Garand Matches are among the most popular of CMP events, and the M1 Garand, acquired direct from the CMP, still represents a great value among collectible, military-style firearms. Recognizing the demand for accurate, yet affordable ammunition for M1 Garands and M1As(civilian version of m14), Federal® has introduced new American Eagle ammo expressly designed for these popular classes of rifles. M1 Garand and M1A shooters now have a quality yet economical ammo option, which reduced risk of slam-fires.

Special Loads for Special Rifles
The M1A and M1 Garand are storied rifles with a huge following. Unfortunately, much of the hunting ammunition today isn’t suitable for these special rifles. “We know there is a very large number of shooters who use the M1A and M1 Garand rifles at the range,” said Kyle Tengwall, Federal’s director of marketing. “Whether it’s practicing for a competition, or just spending some time at the range, these shooters need affordable loads that perform well. These new loads cater to this special segment of shooters, and we’re proud to offer them something that shoots great and is available at price that can’t be beat.”

These special loads use staked primers to reduce the risk of firearm malfunction, including slamfires. The M1 Garand load features a 150-gr FMJ bullet and a carefully selected propellant that produces pressures that match the gas system design. The M1A load utilizes a 168-grain Open Tip Match (OTM) bullet that gives match-grade accuracy at an unbeatable price.

Ammo Specs:
A76251M1A / 7.62×51, 168gr OTM 2650 fps
AE3006M1 / 30-06, 150gr FMJ 2740 fps