Video Intro to Handgun Silhouette

This 8-minute video, filmed at the Ojai Valley Gun Club in California, shows a 200m metallic silhouette match for handguns. Noted IHMSA shooter Jim Harris describes the course and shooters demonstrate their technique. With these iron-sight, single-shot centerfire pistols, when shooting “freestyle”, most shooters prefer the lying down, feet-first Creedmoor position. This allows them to steady their pistols along the side of the front leg. In the 1800s, long-range rifle shooters also commonly used a Creedmoor position, sometimes resting the barrel on the toes of their boots.

CLICK HERE to WATCH VIDEO

In this second video, Jim compares two “Unlimited” pistols, one in 6.5 BR and the other in 7mm BR. Jim explains the pistols’ features and chamberings. Then the video offers a “shooter’s eye” view of Jim and Scott Mann firing the pistols at half-size pig silhouettes. Watch Jim and Scott both “clean” all five of their respective targets at 100m.

CLICK HERE for SECOND VIDEO

Shown below is an Anschütz Model 1416 MSP E Silhouette pistol, similar to the custom pistols you’ll see in the video. The Anschütz 6836 rear sight was specifically developed for handgun silhouette competition. The folding rear sight cover and anti-glare front sight tube greatly improve the sight picture. This 4.1-lb, single-shot pistol has a trigger pull weight of about 300 grams, roughly 10 ounces.

Jim Harris (”Gunzorro”) has posted many other shooting videos, which you’ll find on the “related videos” section of the YouTube page to which we’ve linked. Jim Harris has won several NRA National and IHMSA International championships in metallic handgun silhouette competition. He is also active in High Power Rifle Silhouette and Black Powder Cartridge Silhouette. In the silhouette arena, he helped popularize the 6.5BR, 6.5PPC, 6.5TKS (improved BR), .260 Remington and .22 PPC, and pioneered the use of Vihtavuori powders in the mid-90s. Jim is also a successful professional freelance photographer, specializing in commercial photography and architecture. Contact Jim at JimHarrisPhotography.com.

Sound Suppressors for Target and Varmint Rifles

What’s better than a 6BR? A 6BR that produces a LOT less noise and less than half the recoil of a bare-muzzled gun. Our friend USMA89 has a 6BR “Texas Tackdriver” with a trued Rem 700 action and Robertson Composites F-Class stock. Smithed by GA Precision, it has delivered tiny groups at 200 yards with 107 Sierra MKs. With sound suppressor in place, USMA89 tells us, it’s like shooting a 22 mag rimfire: “Shooting with a suppressor or can is a great experience. In fact, once you start shooting with one, it is hard to go back to normal shooting. The recoil reduction is amazing, cutting perceived recoil by as much as 70%. Think of a suppressor as the ultimate muzzle break that reduces sound to boot.”

The cost of a good suppressor ranges from $600-$1000, and then there is the $200 to Uncle Sam for the tax stamp and the 3-6 month wait. (Currently, 33 states allow citizens to own suppressors in accordance with Federal regulations.) The suppressor on this gun is considered one of the best, a SWR Omega. USMA89 adds: “I also use a SRT suppressor and am very pleased with it as well. The SRT costs about $300-$400 less than the SWR and you get the same amount of sound reduction.” With a quality suppressor you can get from 33 to 36 db worth of sound suppression.

Once you have gone though the hoops the government has put in your way (check your state laws also!), mounting is easy. Get a good gunsmith to thread your barrel (5/8×24 is the normal class 3 thread) and screw it on. In general suppressed guns barrels are cut shorter for balance. USMA89 explains: “I went with a 28″ barrel and with the can it is a little front-heavy, but the stock’s wide fore-end compensates for this. If this were a ‘tactical’ weapon, I would have the barrel cut down to at least 22″, maybe less. Most people that use suppressors will tell you that they shoot better groups with a can than without. This is because there is less recoil, less ‘dirty air’ behind the bullet, and (in many cases) you get improved barrel harmonics.”

To learn more about silenced weapons, read this article on Firearm Sound Suppressors by Mark White.